

|
“Just one search to find a Rising Damp Specialist and Compare Costs for Damp Proof Injection, Tanking & Dry Rot & Wood Treatment Nationwide....”
Since our launch in early 2010 Damp Proofing Supermarket have rapidly become the fastest growing UK Rising Damp & Dry Rot Cost Comparison site.
|
|
For practical purposes, decay in house woodwork can be classed as either wet rot or dry rot.
Wet rot is caused by fungi that can only spread as far as the moisture has penetrated and their strands (root-like growths) cannot penetrate brickwork. There are a number of fungi that can cause this type of rot. In floors the most common one is the cellar fungus, Conio-phora puteana (formerly C. cerebelld). This makes affected wood darken and leads to cracks forming which mainly run along the grain of the wood. The fungus often forms narrow, dark brown strands on the surface of the wood.
Dry rot is a much more serious type of decay which, in the UK, is caused by the dry rot fungus Serpula (formerly known as Merulius) lacrymans. Like all other fungi, it needs damp conditions to become established, but once it gets a hold it forms root-like strands, sometimes as thick as a pencil, which enable it to spread into surrounding less damp timber and to penetrate through walls and masonry. The infection can spread from one room to another and the strands can be found in walls between the plaster and the brickwork. They can also travel through mortar joints seeking out any pieces of timber in the walls.
Wood attacked by dry rot tends to break up into dry brick-shaped pieces and usually has grey, fell-like growths of fungus on its surface. However, if the air around the fungus is very moist, it can form white, fluffy cotton wool-like growths which often have tinges of lilac or yellow on them. When the fungus has been growing for a year or two, it produces fruiting bodies on the surface of the wood or on adjacent brickwork. These are pancake-shaped with a wrinkled surface that soon becomes a bright, rusty red colour as the spores (seeds) develop. These spores are minute, oval cells about 0.01mm long. They are produced in such abundance that the surrounding surfaces soon become covered with what looks like a fine, rust-coloured dust. When this dust is found on the surface of a floor, it is a sure indication that the dry rot fungus is present somewhere nearby. Sometimes the appearance of the fruiting body is the first indication that dry rot has attacked your timber.
Mould is the least worrying fungal growth that is likely to attack your house. Heavy growths of mildew and dark-coloured moulds may develop as a result of condensation on cold walls. This indicates that there is lack of ventilation and insufficient heating.
If you still need help to compare prices for Damp Proofing or Timber Treatment and would like to talk to a human rather than completing an inquiry form, you are welcome to give our Customer Support Desk a call or send us an e-mail and we will be happy to give you a call back.
“Just one search to find a Rising Damp Specialist and Compare Costs for Damp Proof Injection, Tanking & Dry Rot & Wood Treatment Nationwide....”
![]()
Tel: 0871 5989 529
E-mail: support[@]damp-proofing-supermarket.com
|



Damp Proof Injection
Post an inquiry for a Damp Proofing Survey and compare costs from up to five Rising Damp Specialists...
Feedback for DPC Services
You can view feedback for Damp Proofing or Timber Treatment and leave feedback when your job is done...
Timber Treatment
Use our Cost Comparison tools to compare costs for Timber Treatment and Dry Rot Treatment Nationwide...
A QFJ Media Website
QFJ Media Limited trade-estimates.com UK Reg No: 7098341 © 2005 - 2010. All rights reserved - T&C - Privacy - Disclaimer - Business Links - Sitemap - Contact
Find a Rising Damp Specialist and Compare Costs for Damp Proof Injection - Tanking - Wet Rot - Dry Rot & Wood Treatment Nationwide |
Compare Costs for: | Architects | Surveyors | Air Conditioning | Solar Panels | Double Glazing |